To create a greener world with our safe and energy-saving technology,Professional soft starter and frequency inverter supplier and manufacturer in China
Product Overview
High breaking miniature circuit breaking of DZ47 series mainly used in AC 50Hz,single electrode 230V, two or three or four electrodes 440V, and the protection of overload or short-circuit when the current exceeds 63A.Meanwhile,it also can infrequently break the electric device and light circuit under normal conditions. Besides,
it’s especially suitable for industrial and commercial Lighting distribution system.
All technical indexes are in conformity with IEC60898-1 and GB10963.1.
Product Overview
High breaking miniature circuit breaking of DZ47 series mainly used in AC 50Hz,single electrode 230V, two or three or four electrodes 440V, and the protection of overload or short-circuit when the current exceeds 63A.Meanwhile,it also can infrequently break the electric device and light circuit under normal conditions. Besides,
it’s especially suitable for industrial and commercial Lighting distribution system.
All technical indexes are in conformity with IEC60898-1 and GB10963.1.
M7 Series molded case circuit breaker,whose insulated Voltages 800V,suitable for conversion and starting a motor not frequently in the circuit of 50Hz AC(or 660Hz) rated working voltage 690V,rated working current up to1250A
EZC MCCB is used in distribution network of AC 50/60HZ, rated voltage 500V, rated current 10A to 630A for power distribution ,line protection and damage prevention from overload and short circuit of the power supply and electric equipment, which improves reliability and continuity of the power supply.
It accords with international standards of IEC947-1.-2.-4.-5.1.
Product Overview
SNSX MCCB is suitable for the circuit of AC 50/60HZ, rated isolation voltage 750V, rated working voltage up to 690V and rated current up to 630A.
The installation height above sea level can not exceed 2000 meters. The breaker can be used at a temperature between -25 ℃ to +70 ℃. When the temperature exceeds 40 ℃
( or for the motor protection it exceeds 65 ℃ ), the capacity must be reduced for the equipment . It can withstand the impact from humid air, salt fog, oil mist and mildew fog.
It should be installed in the medium without explosive hazard or non conductive dust, and the media is not strong enough to corrode the metal or destroy the insulation.
It complies with the international standards of IEC 60947-1.-2.-3.-4-5.1.